The down-facing box wall is the floor. Hiding it changes the drawing, not material contacts.
Object settings
100% is the reference magnet. Zero turns its field off. Changing strength pauses motion.
Magnetic moment |m|
—
Axial reference |B|
—
What does the field value mean?
B on the dipole axis = μ₀|m| / (2πr³)
This is the ideal dipole model outside the bar icon. The probe measures the combined field from every enabled source; its reading can be different.
Static holds its position. Dynamic responds to its modelled forces; gravity is a separate choice. Finite bodies use Objects (SI seconds); particles use the Particles clock.
Off-centre contacts and magnetic torque can turn this body. Uncheck to hold its orientation.
Initial spin / rad·s⁻¹
World-axis angular velocity. Apply with the values below.
Initial velocity / m·s⁻¹
Choose Dynamic to set a velocity. A static object has zero velocity.
Impacts since reset
Simultaneous contact needed a numerical energy correction. Treat individual contact impulses as approximate.
Last impact & energy
Approach speed is measured along the contact normal. Body-to-body energy loss is for the pair. An instantaneous impact gives an impulse, not a peak force.
Resting on a surface adds no impacts. Each dynamic object counts its own collisions. Reset motion clears these counts.
Physics behind a bounce
The height rule is an ideal check for a drop from rest: uniform gravity, no damping or magnetic-force gradient, a fixed horizontal floor, locked rotation and a single normal bounce. Here h is face-to-floor clearance. The marked floor follows gravity (−y when gravity is off). Source contacts use approximate solid envelopes and field-exclusion regions; a model-domain stop is not an impact or magnetic levitation.
Bounce, friction & damping
Blank values use the scene settings. e = 0 settles; e = 1 is an ideal elastic bounce.
Select a particle or metal sheet to set its motion.
Choose an experiment, or add an object to begin.Particle clock · seconds
Field display
Choose what helps you see the pattern.
Line options
Follow the field
Each curve is tangent to the total magnetic field. Colour shows strength; line count and emphasis are chosen for readability, not quantitative flux. Moving markers show direction, not particles. Lines remain in 3D when the vector arrows are sliced.
Camera & image
EXPLORE
Experiment library
No matches. Clear a filter, or use Advanced for extension models.
Guided investigations
GUIDED INVESTIGATIONSChoose a guided investigationA question, a hint and a way to test your idea
Choose one investigation for your learning level. Your question and notes open in Learn beside the experiment.
No guided investigations match. Change a filter, or look in Starting scenes.
Quick starting scenes
More experimentsFields, beams & interacting charges
No experiments match these filters. Try All topics or another starting point.
Magnetic Field Lab
Build a field, place the probe and compare a particle’s path. Every example opens paused.
↻ Orbit
Drag the background to look around. Scroll or use +/− to zoom. Focus the scene: W/A/S/D move across the ground plane, Q/E turn, and Page Up/Down change height. Hold Shift for precise movement. Camera options include speed, smoothing and on-screen height/turn controls. Middle-drag pans the view.
↔ Move
Select an object, choose an axis, then drag. Switch to Rotate to turn its direction.
⌗ Environment
Drag a box face to resize the space. Open its menu to set background B and gravity.
⚙ Object motion
Select a finite source, sheet or particle. Motion and Gravity are independent. Infinite wires and background fields stay constrained.
Hover, right-click or use ⌄ beside a tool for its options. Escape closes a menu. Touch users can tap the chevrons.
Choose a learning level
Created by Mr. Sheedy.
Equations, units & models
B · I · q · v · F — Symbols & units
The 3D scene and calculation bench share SI quantities. Grid coordinates and source coefficients are converted using the scale shown above the scene.
Field formulas & particle motionSI equations, scales & worked valuesBackground field, gravity & object motion
Simple sets a uniform background field. Advanced Field designer also supports gradients and formula-defined fields. Gravity is a separate uniform acceleration. Infinite wires and background fields remain constrained. Finite bodies and particles use separate labelled physical clocks.
Particle motion uses the microscopic clock; ordinary gravity is usually imperceptible over nanoseconds. Metal sheets use a separate seconds clock. Finite magnets and sheets can translate and rotate on the Objects clock. Their selected mass and rigid shape set inertia. Magnetic torque and off-centre contact impulses can tip them; lock rotation for a controlled comparison. Loops and hypothetical monopole markers have gravity/contact motion only; infinite wires and backgrounds remain constrained. Force-disabled charges follow a prescribed path and can exchange energy with coupled particles through an external drive.
Understand the modelEquations, assumptions & references
Field sources & measured space
Grid coordinates are dimensionless coefficients. A position x corresponds to \(\vec x_{\mathrm{SI}}=L_0\vec x\) metres, and \(\vec B_{\mathrm{SI}}=B_0\vec B\) tesla. The grid, box dimensions, probe and formulas use the same selected L₀ and B₀. The screen ruler applies at its stated depth; perspective changes apparent lengths elsewhere.
A point dipole has \(\vec B=\frac{\mu_0}{4\pi r^3}[3\hat r(\vec m\cdot\hat r)-\vec m]\). Its bevelled N/S icon shows direction and a collision proxy, not a calculated finite bar-magnet interior. An infinite thin wire has \(B=\frac{\mu_0I}{2\pi\rho}\); a circular loop uses the finite Biot–Savart solution. Source fields add as vectors. Lead diagrams do not add extra magnetic fields.
Real particles, classical trajectories
\(\vec F_B=q\,\vec v\times\vec B\) for independent particles, with their actual rest mass and net charge. Optional softened Coulomb coupling supplies pair electric forces. The Boris rotation preserves speed in a magnetic-only step; this does not make its trajectory exact at every time resolution.
In a uniform field, \(r_L=\frac{mv_\perp}{|q|B}\) and \(T=\frac{2\pi m}{|q|B}\). Named particles retain fixed physical properties. This classical model restricts speed to 0.05c and omits radiation, relativity, spin precession, Stern–Gerlach forces, atomic polarisation and internal quantum transitions. A neutron or neutral atom can have magnetic structure even though its Lorentz force is zero. With gravity off, its independent trajectory is straight.
Two clocks, explicit approximations
The microscopic clock follows \(T_0=\frac{m_e}{eB_0}\), \(V_0=\frac{L_0}{T_0}\). Playback slows fast motion for viewing; the displayed seconds remain physical. Material motion runs separately in seconds and pauses particle evolution. Sheets translate with orientation held fixed; sources stay anchored.
The approximate induced dipoles respond to the external field. Their force uses its gradient; a uniform field alone supplies no translational attraction. Contacts use rigid model envelopes and optional restitution and damping. They do not predict bending, fracture, adhesion, hysteresis or eddy-current braking. The pulse is a separate one-loop R–L experiment, not a distributed current or induced-electric-field solver.
Supplies, boundaries & thought experiments
For the stated copper-wire geometry, the DC supply model uses \(R=\frac{\ell}{\sigma A}\), \(V=IR\) and \(P=I^2R\). The ideal source follows the resulting steady current. The meter and cable drawing is not a generator or motor mechanics simulation; heating and lead magnetic fields are omitted.
Singular cores remain excluded: their grid radii are 0.32 for a dipole, 0.25 for a monopole, 0.22 for a wire and 0.16 around a loop filament. Multiply by L₀ for metres. These are model envelopes. Ordinary fields have \(\nabla\cdot\vec B=0\); the labelled monopole is hypothetical. Paths stop at cores, sheets, the adjustable box or numerical limits.
Sources, sheets, settings and particle states are included. Loading starts paused with settled sheet currents; trails, impact counts and pulse histories are not saved.